Fabrication Studio Metalworking Equipment List

Metalworking Tools

These are the most popular metalworking tools in the Fabrication Studio. There are more tools not listed here available for use at the Studio.

Manufacturer: Jet

Model: JTM – 4VS

Accessories: 9″x49″ Table, 3 axis DRO, 3 axis Power Feeds, Power Draw Bar

Model: GH-1440W-1

Accessories: 14″ Swing, 8.5″ over cross slide, 40″ bed, 3HP

Model: PCNC 1100M

Accessories: Travels: X=18″, Y=11″, Z=16.25″, 34″x9.5″ Table, Haimer 3d Sensor, Power Draw Bar, Manual tool changes

Model: VF2 SS

Accessories: Travels: X=30″, Y=16″, Z=20″, 36″x14″ Table, 1500lb. Cap, 30+1 Tool Changer

Model: VBS-1610

Accessories: 16″ throat, metal cutting

Model: HS1452- 3T

Accessories: 52″ Cut, 14ga. Capacity in mild steel, 12ga. in soft alloys. 25″ Back gauge

Model: JDP-20MF

Accessories: 3/4″ Chuck. 1.5 HP, 12 speeds

Model: HN-16N/S-16N

Accessories: 16 ga. Capacity for mild steel

Model: BP-1648H

Accessories: 16 ga. Capacity for mild steel, 2″,3″, 4″ Fingers

Model: UNHS

Accessories: Pipe Dies: 1/2,3/4,1,1.25″, Has 90 degree press brake: 1/8″ Cap.@ 10″ wide, 5/8″ cap.@ 2″ wide

Print manual available.

Model: Millermatic 255

Accessories: 240v MIG welder